The long awaited release of a new driver to allow the Sony UPDR 200 to cut 2×6 strips has now been officially released!
With this new driver, you can get the following results based on which paper you are using
· 2UPC-R204: 4×6 inch and 2 x 6 inch cuts
· 2UPC-R205: 5×7 inch and 3.5 x 5 inch cuts
· 2UPC-R206:6×8 inch and 4 x 6 inch cuts
In order to use the new 2×6 cut, you will have to upgrade the firmware to v1.14
You can download both the new driver and the updated firmware from Imaging Spectrum’s support site, or you can head here to go directly to Sony’s website.
A big thanks to Steve over at Imaging Spectrum for the tip!
Loading ...
no comments